HP Vectra VL 6xxx series 8 - Manual (Page 90)

Appendix A The Error Codes
1000h – 100Dh: Multiple Processor Error Codes
78 English
1014h L2 cache commands test failed. Check processor, L2 cache and main memory are
correctly installed.
If problem persists, install new:
• L2 memory (if installed in accessory slot), or
• processor (if integrated on the processor card).
1015h The pattern read back from the cache is
not the same as the pattern written. Check processor, L2 cache and main memory are
correctly installed.
If problem persists, install new:
• L2 memory (if installed in accessory slot), or
• processor (if integrated on the processor card).
1016h Tag Write with Data Read command
failed. Check processor, L2 cache and main memory are
correctly installed.
If problem persists, install new:
• L2 memory (if installed in accessory slot), or
• processor (if integrated on the processor card).
1017h Tag Read with Data Read command
failed. Check processor, L2 cache and main memory are
correctly installed.
If problem persists, install new:
• L2 memory (if installed in accessory slot), or
• processor (if integrated on the processor card).
1030h L2 Cache Pattern error. Cache memory error.
Check processor, L2 cache and main memory are
correctly installed.
Run memory tests to confirm correct function of
main memory and any external L2 cache memory.
If error persists, replace processor.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 78 Wednesday, June 30, 1999 3:06 PM