HP Vectra VL 6xxx series 8 - Manual (Page 88)

Appendix A The Error Codes
1000h – 100Dh: Multiple Processor Error Codes
76 English
1000h – 100Dh: Multiple Processor Error Codes
0F04h Seek operation failed. If the seek function is supported by the device
controller, replace the controller.
0F05h Eject fails on drive x. The eject feature is not supported or does not work.
Re-run the diagnostics test.
Code Explanation Details/Parts to Check
1000h Processors don't have unique IDs. Processor ID error.
Check that the processor is correctly configured.
1001h Processor X failed to interrupt processor
Y. Processor error.
Install a new processor.
1002h IPI physical mode test failed on processor
X. Processor error.
Install a new processor.
1008h MPI arbitration test failed. Processor error.
Check that the processor is correctly configured.
If the error persists, install new processor.
1009h Cache coherency test failed. Processor error.
Check that the processor is correctly configured.
If the error persists, install new processor.
100Ah Memory consistency test failed. Processor error.
Check that processor is
Install a new processor.
100Bh I/O access test failed on processor X at
port XXXXh. Processor error.
Install a new processor.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 76 Wednesday, June 30, 1999 3:06 PM