HP Vectra VL 6xxx series 8 - Manual (Page 62)

Appendix A The Error Codes
0001h – 00CCh: System Error Codes
50 English
00A4h NVRam base address is invalid. Install new system BIOS.
00A5h PnP function 42 failed. Install new system BIOS.
00A6h PnP function 43 failed. Install new system BIOS.
00A7h NVRam test failed. Install new system BIOS.
If error persists, install new system board.
00C0h Non-Intel processor. Install Intel processor.
00C1h Non-Pentium processor. Install Pentium processor.
00C2h Non-MMX processor. Install MMX processor.
00C3h MMX Registers Read/Write failed. Install new processor.
00C4h Wraparound Arithmetic test failed. Install new processor.
00C5h Saturation Arithmetic test failed. Install new processor.
00C6h Pack with signed saturation failed. Install new processor.
00C7h Pack with unsigned saturation failed. Install new processor.
00C8h Unpack high packed data failed. Install new processor.
00C9h Unpack low packed data failed. Install new processor.
00CAh Exit MMX state instruction (EMMS)
failed. Install new processor.
00CBh Matrix transpose test failed. Install new processor.
00CCh MMX performance failed. Install new processor.
00FFh Out of memory. Re-run the HP Hardware Diagnostics utility using
keyboard only.
Code Explanation Details/Parts to Check
guard.bk : g-e-ref1.fb4 Page 50 Wednesday, June 30, 1999 3:06 PM