HP Vectra VL 6xxx series 8 - Manual (Page 34)

3 Basic System Test
What is Tested
22 English
What is Tested
The basic tests include the following:
❒ Basic System Tests, to verify the correct functioning of the processor
and subsystems:
• Basic processor functionality
• DMA controller
• Interrupt controller
• Timer
• Real time clock
• CMOS Validity
• PCI system
• MMX
• DMI
• Multi-processor (if appropriate)
❒ Memory Tests, to check the correct functioning of main and cache
memory:
• BIOS ROM
• Parity
• Address
• Refresh
• Data bus
• Cache memory
❒ IDE hard disk drive tests, to check the basic functioning of any IDE
hard disk drives.
• Basic IDE HDD functionality
❒ SCSI hard disk drive, to check the basic functioning of any SCSI hard
disk drives:
• Basic SCSI HDD functionality
• SCSI disk buffer
guard.bk : guard3.fb4 Page 22 Wednesday, June 30, 1999 3:06 PM