Attributes, Actions, Fc-al i/o module – HP NonStop G-Series User Manual
Page 112: Fc-al i/o modules
For information on how to replace an individual IOAM Fan, see the
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > Fan
Example: Fan (13.2.16)
Attributes
Physical
LED State
Indicates whether or not the fans amber LED is lit. This state is determined by the
action.
Value: On or Off
Logical
Device State The state of the component as known to the operating system on the server.
Actions
Set LED State
Turns on or off the amber LED located on the fan. The current state is indicated by the
attribute.
FC-AL I/O Module
Subcomponent of a
.
There are two FC-AL I/O Modules in each enclosure. These modules are the interface between the
drive enclosure elements and the host controller. They route data to and from the drives using loop A
and loop B.
Location in OSM Tree: System > Group > Daisy Chained Disk Drive Enclosure > Disk Drive
Enclosure > FC-AL I/O Module
Example: FC-AL I/O Module (111.211.1.93)
Attributes
FC-AL I/O Module