Swan clip, Attributes, Each swan cru contains up to three – HP NonStop G-Series User Manual
Page 191: Clip, Swan 2 clip
SWAN CLIP
A communications line interface processor (CLIP) is a component of a
CRU.
The CLIP provides a link-level protocol and a software interface to the host.
Each SWAN concentrator contains up to three CLIPs, and each CLIP has two
.
Each SWAN 2 CRU contains up to six SWAN 2 CLIPs, and each CLIP has two WAN Lines and two
SWAN Paths.
Location in OSM Tree: System > SWAN Collection > SWAN > CLIP
Slot Location: CLIPs are external to the enclosures.
Example: CLIP $ZZWAN.# SWAN2.2
Attributes
CLIP $ZZWAN
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Logical
Device State The state of the component as known to the operating system on the server.
Physical
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Firmware
Version
The version of the firmware on the concentrator communications line interface
processor (CLIP) of the ServerNet wide area network (SWAN).
Default File Name
The name of the file to be used for a firmware update.
Default File Version The version of the firmware to be used for a firmware update .