HP NonStop G-Series - Manual (Page 76)

Automatic Firmware Update
Indication of whether the ATM CRU firmware is automatically
updated when the ATM CRU is started. The automatic firmware
update occurs if either the Start action is performed through the OSM
software or the START ADAPTER command is issued from SCF.
Enabled: The firmware is automatically updated.
Disabled: The firmware is not automatically updated.
Unknown:: The Automatic Firmware Update state could not be read.
Device State
The state of the component as known to the operating system on the
server.
Values
Automatic Reload State
Indication of whether the ATM CRU software is automatically
reloaded if the adapter software terminates abnormally.
Enabled: The software is automatically reloaded.
Disabled: The software is not automatically reloaded.
Unknown:: The Automatic Reload state could not be read.
Download Filename The name of the file used to download the ATM CRU adapter.
Processor Access List The currently available processors that can access the adapter.
Firmware
Version The version of the firmware running on the ATM CRU.
Default Firmware Filename The name of the file to be used for a firmware update.
Default Firmware File Version The version of the firmware to be used for a firmware update.
Compare State
Indication of the differences, if any, between the current and default
firmware versions.
Values
Actions
Abort
Terminates operation of the ATM CRU and the associated ATM line. When the Abort action
finishes, the ATM CRU and the ATM line are in the Stopped state.
Firmware Update
Updates the ATM adapter firmware.
Responsive Test
Verifies that the component is connected and responding.
Start
Starts the ATM CRU and the associated ATM line. The ATM CRU must be in the Stopped state
before you perform this action.