HP NonStop G-Series - Manual (Page 243)

Switch Logic Board
Attributes
Actions
A circuit board that provides switching logic for the 6780 switch . The logic board connects to a
panel on the front of the 6780 switch for operator and maintenance functions.
Location in OSM tree: External ServerNet Fabric > Switch Group > Switch Module > Switch
Logic Board
Example: Switch Logic Board (1020.1.14)
Attributes
Switch Logic Board
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Physical
Part Number The part number of the switch logic board.
LED State
The state of the fault LED on the switch logic board.
Values: On, Off, On and Blinking, Off and Blinking
Track ID The track ID of the switch logic board.
Hardware Revision The hardware revision of the switch logic board.
Logical
Last Reset Type
The reason for last reset operation.
Values:
Hardware initiated
Soft reset button pressed
Front panel button pressed
Second Level Watchdog timer expiration
Third Level Watchdog timer expiration
Firmware initiated
Soft reset command issued
Hard reset command issued
Time of Last Soft Reset The date and time of the last processor soft reset.