HP NonStop G-Series User Manual
Page 174
Part Number
Only for the CCSA SAC.
The Part Number of the component that was assigned in manufacturing. Use part
numbers for identifying and ordering parts.
Device ID
Only for the CCSA SAC.
The ID assigned by the device manufacturer.
Example: 0x860
Vendor ID
Only for the CCSA SAC.
The manufacturer of the device.
Example: 0x10E3
Logical
Dump Filename
The name of the file used to store dumps of the SAC memory.
Automatic Boot State
Indicates whether the SAC boot firmware is automatically reloaded if it
terminates abnormally:
Enabled: The boot firmware is automatically reloaded.
Disabled: The boot firmware is not automatically reloaded.
Unknown: Automatic Boot state could not be read.
Automatic Dump State
Whether the SAC software is automatically dumped to the specified dump
file if the software abends abnormally:
Enabled: The software is automatically copied to a dump file.
Disabled: The software is not automatically copied to a dump file.
Unknown: Automatic Dump state could not be read.
Processor Access List
The currently available processors that can access the SAC.
Example: 0,1
Device State
The state of the component as known to the operating system on the server.
Owning Processor
The processor to which the SAC is connected.
Example: 0
Download File Name
The file name of the operational firmware running on the SAC.
Download File Version The version of the operational firmware running on the SAC.
Firmware
Version
The version of the boot firmware for the SAC.
Default File Name
The name of the file to be used for a (boot)
.