Actions, Servernet cluster – HP NonStop G-Series User Manual
Page 232
Configuration Tag
A parameter used by SCF and the guided procedures that allows
SANMAN to select an appropriate switch configuration block (SCB)
from the M6770CL switch configuration library. The selected SCB is
subsequently loaded on the specified switch. The configuration tag
determines the position of the cluster switch in the topology and the
ServerNet node numbers supported by the cluster switch.
Example: Max 24 nodes, nodes 1-8
GUID
A unique, read-only number stored in nonvolatile memory
(SEEPROM) on a ServerNet II switch. The Globally Unique ID can be
used programmatically to identify the switch.
Fabric Setting
Whether the switch is configured for operation on the X fabric or the Y
fabric.
Values: X, Y, or Clear
Presence
Verification that the switch is installed and responding.
Values: Present, Absent, Unknown
Configuration Version
The version of the configuration file currently loaded on the switch.
Example: 1_5
Firmware Version
The version of the firmware currently loaded on the switch.
Example: 3_0_23
Actions
None.
ServerNet Cluster
A ServerNet cluster is a collection of NonStop servers connected together that function as a
single processing unit. Servers within a ServerNet cluster pass information to each other using
the ServerNet protocol.
Location in OSM tree: Located at the top level.
See also