HP Compaq Integrated Smart Array Controller - Manual (Page 101)

Compaq Array Configuration Utility 6-33
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: g-ch6 Compaq Array Configuration Utility.doc Last Saved On: 8/27/99 11:25 AM
Extending Logical Drives
To extend the capacity of a logical drive:
1. Select the logical drive that you want to extend.
2. Pull down the Drive menu.
3. Select Extend Logical Drive.
The Extend Logical Drive screen, similar to figure below, displays the
current capacity and RAID overhead of the selected logical drive.
Figure 6-26. Extend Logical Drive screen
4. Move the slider control to increase or change the size of the logical
drive.
NOTE: You cannot reduce the size of the logical drive from this screen.
5. Select Done.
6. Save the logical drive by selecting the Controller menu and selecting
Save Configuration option.
The logical drive will be restructured so that its data will be preserved. Refer
to the status gauge at the lower right of the screen to monitor the progress.