Choosing a controller for the array, Choosing a controller for the array -23 – HP Compaq Integrated Smart Array Controller User Manual
Page 91
Compaq Array Configuration Utility 6-23
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: g-ch6 Compaq Array Configuration Utility.doc Last Saved On: 8/27/99 11:25 AM
Choosing a Controller for the Array
Start the Array Configuration Utility from the SmartStart and Support
Software CD. From the Main Configuration Screen, select the Controller
Selection frame. You can also select Controller/Select from the main menu.
1. Select one of the controllers listed in the Controller Selection frame.
Figure 6-16. Controller Selection frame
2. Select the Settings button shown below.
Figure 6-17. Controller buttons
3. At the Controller Settings screen, select your operating system.
Figure 6-18. Controller Settings screen
4. Select the Done button to save settings and exit.