HP Compaq Integrated Smart Array Controller - Manual (Page 45)

Installing the Operating System Drivers 5-5
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: f-ch5 Installing the Operating System Drivers.doc Last Saved On: 8/26/99 8:12 PM
Creating Banyan VINES PAS Diskettes
from SoftPaq
If you do not have access to the Compaq SmartStart and Support Software CD,
create Banyan VINES installation diskettes as follows:
1. Obtain two formatted 1.44-MB diskettes.
2. Locate and download the SoftPaq file called SPXXX.EXE to your hard
drive.
3. Run the downloaded file from your hard drive by typing the following:
C:\DIR\SPXXXX.exe
where C:\dir\ is the directory path on your hard drive. Executing this file
places several new files on your machine, including the program file
QRST5.EXE.
4. Run the QRST5.EXE file and follow the on-screen instructions to insert
DOS-formatted diskettes for creating the SSD diskettes.
5. After the SSD diskettes are created, delete any downloaded file from
SoftPaq.
6. Insert the documentation diskette (diskette 2) into the diskette drive and
view the installation instructions in either of two ways:
G Type the file path and name from the DOS prompt:
A:\README
G Boot the system with the documentation diskette in the diskette
drive.
NOTE: New SoftPaqs are available on the Compaq website
http://www.compaq.com