HP Compaq Integrated Smart Array Controller - Manual (Page 83)

Compaq Array Configuration Utility 6-15
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: g-ch6 Compaq Array Configuration Utility.doc Last Saved On: 8/27/99 11:25 AM
Figure 6-12. NetWare autoconfiguration wizard using RAID 1 fault tolerance
Custom Configuration
Custom configuration allows you to create arrays and to assign fault tolerance
one array at a time. To custom configure an array, make selections from the
main configuration screen. Highlight the controller, array, or logical drive you
want to configure. Make a selection from the Options menu located on the
right side of the screen. The figure below shows the main configuration screen
with the controller highlighted on the left side of the screen and controller
options on the right side of the screen.