Microsoft windows 2000, Locating the driver and installation information, Installing the driver – HP Compaq Integrated Smart Array Controller User Manual

Page 54: Microsoft windows 2000 -14

Advertising
background image

5-14 Compaq Integrated Smart Array Controller User Guide

Compaq Confidential – Need to Know Required

Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:

Part Number: 153236-001 File Name: f-ch5 Installing the Operating System Drivers.doc Last Saved On: 8/26/99 8:12 PM

Microsoft Windows 2000

This section provides instructions for retrieving the latest files and information
necessary to install the initial driver for a new Integrated Smart Array
Controller or to upgrade the driver in an existing Microsoft Windows 2000
environment with an installed integrated array controller. Consult your
software user documentation for additional Windows 2000 installation
guidelines.

Locating the Driver and Installation Information

When you use SmartStart to install Windows 2000 and device drivers on a
new server, you do not need to create the Compaq SSD for Windows 2000
installation diskettes and can continue with the procedure below. If you did not
use SmartStart to install Windows 2000, use the procedure described in
“Creating Installation Diskettes for Common Operating Systems” to create the
installation diskettes before proceeding.

Installing the Driver

When prompted, use the Compaq SSD for Windows NT installation diskettes
to install the controller driver for Windows 2000:

1. Begin the Windows 2000 installation process as described in the

operating system documentation.

2. Press F6 to load media devices and drivers.

3. Press S when prompted to specify additional mass storage devices.

4. Insert the Compaq SSD for Windows 2000 diskette 1 into the floppy

drive and press Enter.

5. Select Compaq Integrated Smart Array Controller for Windows 2000

from the list of displayed controllers and press Enter.

6. Press Enter to continue installing Windows 2000.

7. Insert additional Windows NT installation diskettes as needed to

complete device setup.

8. When setup for media devices is complete, press Enter to continue

installing Windows 2000.

Advertising