HP Compaq Integrated Smart Array Controller - Manual (Page 133)

Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: j-appc Questions and Answers.doc Last Saved On: 8/26/99 7:37 PM
Appendix
C
Questions and Answers
This section contains several common questions and answers about the
Integrated Smart Array Controller. Where indicated, use the
Documentation CD, SmartStart and Support Software CD, and other user
documentation provided with your server or option kit as reference sources.
Additional information about Compaq hardware and services is available on
the Compaq website:
http://www.compaq.com
Q. Does the Integrated Smart Array Controller support SCSI tape
drives and CD-ROM Drives?
A. Yes. The Integrated Smart Array Controller supports Wide Ultra2 SCSI
and Wide-Ultra SCSI-3 hard drives, as well as tape drive formats such
as DLT, DAT, SLR, and AIT.
Q. I installed the hard drives in my server. Must I now terminate each
drive?
A. No. If you installed hard drives in a server with an Integrated Smart
Array Controller, all termination requirements are met by the controller
and the SCSI signal cable. Therefore, the individual drives should have
termination removed.