HP Compaq Integrated Smart Array Controller - Manual (Page 49)

Installing the Operating System Drivers 5-9
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: f-ch5 Installing the Operating System Drivers.doc Last Saved On: 8/26/99 8:12 PM
Microsoft Windows NT 4.0
This section includes instructions for installing the initial driver for a first-time
Integrated Smart Array Controller installation or for upgrading the driver for
an installed Smart Array Controller in an existing Windows NT server.
If you used SmartStart to install Windows NT and drivers on a new server,
you do not need to make the Support Server Diskette (SSD) utility diskettes
and can continue with the procedure below. Before proceeding, if you did not
use SmartStart to install Windows NT, create the installation diskettes as
described earlier in this chapter in the section called “Creating Installation
Diskettes for Common Operating Systems.”
Materials Needed
To install the Integrated Smart Array Controller Windows NT driver on your
server, you will need:
■ Compaq SmartStart and Support Software CD
■ Access to a server or workstation with a bootable CD-ROM drive or any
system running Windows 95, 98, or NT with an available CD-ROM
drive
■ Compaq SSD for Windows NT installation diskettes, if required
■ Your Microsoft operating system CD or media
Additional Information
A file called NTREADME.HLP on the Compaq SSD for Windows NT
diskettes contains the latest information about Windows NT, including the
driver installation procedure. Review this information and, where different
from the instructions shown here, use the instructions provided in
NTREADME.HLP file.