HP Compaq Integrated Smart Array Controller - Manual (Page 44)

5-4 Compaq Integrated Smart Array Controller User Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: f-ch5 Installing the Operating System Drivers.doc Last Saved On: 8/26/99 8:12 PM
Creating Banyan VINES Peripheral Adapter Support
(PAS) Diskettes
The Banyan VINES, version 7.0 or later, driver for the Integrated Smart Array
Controller is located on the Compaq SmartStart and Support Software CD. To
install the driver, create the Compaq installation for Banyan VINES diskettes.
These diskettes contain the latest drivers and documentation for using Compaq
equipment in a Banyan VINES environment.
If you do not have the SmartStart CD, create the installation diskettes by
downloading files from the SoftPaq technical assistance area on the Compaq
website:
http://www.compaq.com
At the website, locate your software in the Support area.
Creating Banyan VINES PAS Diskettes from the
SmartStart and Support Software CD
Create the PAS diskettes from the SmartStart CD:
Create the diskettes:
1. Run the SmartStart and Support Software CD in one of the following
ways.
G From a local CD-ROM on a workstation running Windows 95/98
NOTE: If the AutoRun function is enabled, the CD will start automatically. If AutoRun is not
enabled, browse to or type in the name of the program file on your CD-ROM drive.
G By booting the server from the CD-ROM
2. Select Create Support Software from the Compaq System Utilities
screen.
3. Select Create Support Software Diskettes from CD Only from the
Diskette Builder screen.
4. Scroll down the list and select Peripheral Adapter Support Software for
VINES 7.0.
5. Follow the instructions on the screen to create the diskettes.