HP Compaq Integrated Smart Array Controller - Manual (Page 66)

5-26 Compaq Integrated Smart Array Controller User Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: f-ch5 Installing the Operating System Drivers.doc Last Saved On: 8/26/99 8:12 PM
Banyan VINES 7.0 or Later
Installing the Driver
Use the instructions in this section to install the initial driver for a new
Integrated Smart Array Controller installation or to upgrade the driver in an
existing Banyan VINES 7.0 or later version server with an installed Integrated
Smart Array Controller. Consult your software user documentation for
additional Banyan VINES installation guidelines.
Additional Information
The last Peripheral Adapter Support Software diskette for installing the
controller driver is created from the SmartStart CD or from SoftPaq and is a
bootable DOS documentation diskette. The README.SSD file on this diskette
contains a short description of the drivers and includes a procedure for
installing the Integrated Smart Array Controller driver. If you need to create
installation diskettes, refer to the section called, “Creating Banyan VINES
Peripheral Adapter Support (PAS) Diskettes.”
Installation Procedures
To install the Integrated Smart Array Controller driver for Banyan VINES
version 7.0 or later, follow the installation procedures specified in the
README.SSD file.
When installation of the Integrated Smart Array Controller and driver is
complete, restart the server to load the driver. Refer to “Updating the Compaq
Insight Management Agents” for additional information.