HP Compaq Integrated Smart Array Controller - Manual (Page 37)

Option ROM Configuration for Arrays Utility 4-3
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: e-ch4 Option ROM Configuration for Arrays Utility.doc Last Saved On: 9/1/99 2:13 PM
Create Logical Drive Screen
The Create Logical Drive screen allows you to select the new configuration.
This screen appears when no logical drives are configured. The number of
available physical drives is shown in the menu box.
Option ROM Configuration for Arrays, version x.x
Copyright 1999, COMPAQ Computer Corporation
Integrated Smart Array Controller
Detected Physical Drives
Please select the logical drive configuration
Press the arrow keys to select an item
Press <F10> to accept the selection and continue
Press <Esc> to cancel and return to the previous screen
Figure 4-2. Create Logical Drive screen
IMPORTANT: If the logical drive configuration selection you need is not shown on the
Create Logical Drive screen, you must run the Array Configuration Utility (ACU) for your
operating system as described in Chapter 6.
NOTE: The logical drive configuration choices shown on your Create Logical Drive screen
reflect the actual drives available on your system.
[ ] 12.9GB RAID 5 drive, parity, fault tolerant, no online spare
[X] 8.6GB RAID 5 drive, parity, fault tolerant, with online spare
[ ] 8.6GB RAID 1 drive, mirrored, fault tolerant, no online spare
[ ] 4.3GB RAID 1 drive, mirrored, fault tolerant, with online spare
[ ] 17.2GB RAID 0 drive, no fault tolerance
SCSI Port 2: ID 00, COMPAQ AB00911790 4.3GB Drive
SCSI Port 2: ID 01, COMPAQ AB00911790 4.3GB Drive
SCSI Port 2: ID 02, COMPAQ AB00911790 4.3GB Drive
SCSI Port 2: ID 03, COMPAQ AB00411792 4.3GB Drive