HP Compaq Integrated Smart Array Controller - Manual (Page 53)

Installing the Operating System Drivers 5-13
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: f-ch5 Installing the Operating System Drivers.doc Last Saved On: 8/26/99 8:12 PM
6. Select the Compaq Integrated Smart Array Controller component. If you
have previously installed this driver on your system, Setup prompts you
to update the driver.
a. Select Install.
b. Insert the SSD diskettes as needed.
c. When the driver is updated, exit and return to the Setup menu.
7. Install other components through Setup, or select Close to exit.
8. Restart the system with the diskette in the diskette drive to load the
newly installed or updated driver.
Removing the Integrated Smart Array Controller
Driver
Compaq drivers can be removed only with utilities available in the Windows
Control Panel.
IMPORTANT: Do not remove the driver if the system is booting from a device attached to
the Integrated Smart Array Controller. You will get a dialog box stating that the selected
controller is marked as a boot device. Removing the driver in this case may cause the
system to fail at start.
1. Start Windows NT and log in to an account with administrative
privileges.
2. From the Control Panel, launch the SCSI Adapter Utility.
3. Select the Drivers tab.
4. Select Compaq Integrated Smart Array Controller and click Remove.
5. After the driver is removed, select OK. You must restart the server for
the removal to take effect.