HP Compaq Integrated Smart Array Controller - Manual (Page 58)

5-18 Compaq Integrated Smart Array Controller User Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: f-ch5 Installing the Operating System Drivers.doc Last Saved On: 8/26/99 8:12 PM
Compaq SCO OpenServer 5
To access the driver installation information for systems running Compaq
SCO OpenServer 5:
1. Place the diskette labeled SCO Installation Notes for Compaq Servers
into the diskette drive of a server or workstation capable of reading a
DOS text file.
2. Use a text editor or other DOS utility to read the INSTALL.TXT file on
the diskette.
3. Follow the instructions in this file to install the Integrated Smart Array
Controller driver in a server running in an existing Compaq
SCO OpenServer 5 environment.
4. Proceed to the last section in this chapter, “Updating the Compaq
Insight Management Agents.”
SCO OpenServer 5 (Non-Compaq)
To access the driver installation information for systems running
SCO OpenServer 5 (non-Compaq):
1. Place the diskette labeled Documentation Diskette into the diskette drive
of a server or workstation capable of reading a DOS text file.
2. Shut down and restart the system.
3. Locate the file named INSTALL.TXT, and press Enter to view the file,
or press F7 to print the file.
NOTE: To print the file, the server you are configuring must be connected to a printer.
4. Follow the instructions in the file to install the Integrated Smart Array
Controller driver in a server running non-Compaq version of
SCO OpenServer 5.
5. Proceed to the last section in this chapter, “Updating the Compaq
Insight Management Agents.”