HP Compaq Integrated Smart Array Controller - Manual (Page 36)

4-2 Compaq Integrated Smart Array Controller User Guide
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: e-ch4 Option ROM Configuration for Arrays Utility.doc Last Saved On: 9/1/99 2:13 PM
■ The software runs only when six or fewer physical drives (total) are
attached to the supported SCSI buses and only one logical drive is
configured.
■ The software is available in an English language version only.
■ The software does not support any input devices, such as the mouse or
trackball.
Initial Start Screen
The Initial Start screen appears when:
■ Not more than one logical drive is configured
■ No more than six physical drives are attached to all of the supported
SCSI buses
The screen text is appended to any current display on the video adapter, and it
will not erase any previous Power-On Self-Test (POST) or boot information.
The message has a 15-second timer when no logical drives are configured, and
it has a 5-second timer when a logical drive is configured. When the timed
message expires, the utility is skipped.
Compaq Integrated Smart Array Controller (ver x.xx)
Press <F10> to run the Option ROM Configuration for Arrays utility
Press <Esc> to skip configuration and continue
Figure 4-1. Initial Start screen
NOTE: The version number displayed in the Initial Start screen you see reflects the actual
version available on your machine.