Grounding methods – HP Compaq Integrated Smart Array Controller User Manual
Page 106
A-2 Compaq Integrated Smart Array Controller User Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: h-appa Electrostatic Discharge.doc Last Saved On: 8/13/99 11:08 AM
Grounding Methods
There are several methods for grounding. Use one or more of the following
measures when handling or installing electrostatic-sensitive parts:
■
Use a wrist strap connected by a ground cord to a grounded workstation
or the computer chassis. Wrist straps are flexible straps with a minimum
of 1 megohm +/- 10 percent resistance in the ground cords.
■
Use heel straps, toe straps, or bootstraps at standing workstations. Wear
the straps on both feet when standing on conductive floors or dissipating
floor mats.
■
Use conductive field service tools.
■
Use a portable field service kit with a folding static-dissipating work
mat.
If you do not have any of the suggested equipment for proper grounding,
request that a Compaq authorized service provider install the part.
NOTE: For additional information on static electricity, or assistance with the installation of
this product, contact your Compaq authorized service provider.