HP XP7 Storage - Manual (Page 154)

Overview of the Utilities
HDLM provides the following utilities:
• The DLMgetras utility for collecting HDLM error information
When an error occurs, this utility collects the files that contain the
information that you need to submit to your HDLM vendor or maintenance
company. For details about the DLMgetras utility, see The DLMgetras
Utility for Collecting HDLM Error Information on page 7-2 .
• The utility for configuring HDLM remote management client environments
(dlmrmcenv)
If you are managing HDLM by using Global Link Manager, this utility
registers a managed host's user account information on a remote
management client. For details about the dlmrmcenv utility, see The
dlmrmcenv Utility for Configuring HDLM Remote Management Client
Environments on page 7-7 .
• The utility for installing HDLM (installhdlm)
This utility performs a new installation, upgrade installation, or re-
installation of HDLM in the unattended installation mode. In addition,
information set during installation can be displayed. For details about the
installhdlm utility, see
The installhdlm Utility for Installing HDLM on
page 7-8 .
• The utility for removing HDLM (removehdlm)
This utility removes HDLM normally, or in unattended removal mode. For
details about the removehdlm utility, see The removehdlm Utility for
Removing HDLM on page 7-11 .
The DLMgetras Utility for Collecting HDLM Error Information
This utility collects information that is needed to analyze HDLM errors that
have occurred: information such as integrated trace files, trace files,
definition files, and OS information.
Whenever the host is restarted, some of the information that is collected by
the DLMgetras utility will be cleared. As a result, whenever an error occurs,
immediately execute this utility to avoid losing any valuable information.
Format
Execute this utility from the remote management client, in the following
format:
DLMgetras {-s host-name -u user-name -p password [folder-to-which-
collected-information-is-output] [-eventlogtime yyyy/mm/dd | -
eventlogsize {all | maximum-file-length}] | -h}
You can also use lower-case characters as follows:
dlmgetras {-s host-name -u user-name -p password [folder-to-which-
7-2
Utility Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide