Vaisala WXT510 User Manual
Page 100
Advertising
User’s Guide ______________________________________________________________________
98 __________________________________________________________________ M210470EN-D
Changing the wind parameter selection:
0WU,R=0100100001001000<cr><lf>
0WU,R=01001000&00100100<cr><lf>
The response after the change:
0R1<cr><lf>
0R1,Dm=268D,Sm=1.8N<cr><lf>
Example (SDI-12, device address 0):
Changing the measurement interval to 10 seconds:
0XWU,I=10!0<cr><lf>
In SDI-12 mode a separate enquiry (0XWU!) must be given to check the
data content.
NOTE
Character '&' is not allowed in the command.
Advertising