Chapter 8 sensor and data message settings, Wind sensor, Checking the settings – Vaisala WXT510 User Manual
Page 95: Sensor and data message settings, Wind sensor checking the settings, Chapter 8
Chapter 8 ____________________________________________ Sensor and Data Message Settings
VAISALA _______________________________________________________________________ 93
CHAPTER 8
SENSOR AND DATA MESSAGE
SETTINGS
This chapter presents the sensor configuration and data message
formatting commands for all communications protocols: ASCII,
NMEA 0183 and SDI-12.
Sensor and data message settings can also be done by using the Vaisala
Configuration Tool software.With this software tool you can change the
device and sensor settings easily in Windows® environment. See
Table
20 on page 127
.
Wind Sensor
Checking the Settings
With the following command you can check the current wind sensor
settings.
Command format in ASCII and NMEA 0183: aWU<cr><lf>
Command format in SDI-12: aXWU!