Vaisala WXT510 - Manual (Page 31)

Chapter 4 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 29
Installation Procedure
At the measurement site, WXT510 needs to be mounted, aligned, and
connected to the data logger and the power source.
Mounting
Weather Transmitter WXT510 can be mounted either onto a vertical
pole mast or onto a horizontal cross arm. When mounting WXT510
onto a pole mast, an optional mounting kit can be used to ease
mounting. When using the optional mounting kit, alignment is needed
only when mounted for the first time.
Each of the mounting options is further described in the following
sections.
Mounting to Vertical Pole Mast
1. Remove the screw cover and insert WXT510 to the pole mast.
2. Align the transmitter in such a way that the arrow points to north.
3. Tighten the fixing screw (provided) and replace the screw cover.
0505-197 Figure 8 Location of Fixing Screw
NOTE Weather Transmitter WXT510 must be installed to an upright, vertical
position.