MagTek MagneSafe V5 - Manual (Page 2)

ii
Copyright
©
2001-2013
MagTek
®
, Inc.
Printed in the United States of America
Information in this document is subject to change without notice. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of MagTek, Inc.
MagTek is a registered trademark of MagTek, Inc.
MagnePrint is a registered trademark of MagTek, Inc.
MagneSafe
™ is a trademark of MagTek, Inc.
Magensa ™ is a trademark of MagTek, Inc.
USB (Universal Serial Bus) Specification is Copyright
©
1998 by Compaq Computer
Corporation, Intel Corporation, Microsoft Corporation, NEC Corporation.
Appendix A is taken from Universal Serial Bus HID Usage Tables, Version 1.12, Section 10,
Keyboard/Keypad Page (0x07) ©1996-2005 USB Implementers’ Forum
Appendix B is taken from Section 8.3 Report Format for Array Items, Device Class Definition
for Human Interface Devices (HID) Version 1.11, ©1996-2001 USB Implementers’ Forum,
[email protected]
REVISIONS
Rev
Number
Date Notes
1.01 08 Jan 10 Initial Release (previously part of 99875388)
2.01 03/29/2010 Corrected settings for SureSwipe mode; corrected data length
values in a few of the examples
3.01 May 25, 2010 Updated some text to be consistent with other manuals
4.01 July 2, 2010 Added Bulk Encryption
5.01 June, 24, 2011 Corrected default for MP Flags Property; added properties and
commands for Flash, Insert and Serial readers; corrected references
to USB and other interface types; included comprehensive property
map
6.01 November 4, 2011 Property 0x0E available for BulleT
7.01 November 8, 2011 Removed “only once” from the Set Property entry of the USB Serial
Num Property and changed default value to the device serial
number; changed default value of Device Serial Num Property to the
device serial number
8.01 January 12, 2012 Changed “Wireless USB Reader Only” to “BulleT, Flash, Wireless
USB” on Activity Timeout Period and Stay Powered After Swipe
Property.; added note showing how to leave power on continuously
9.01 January 25, 2012 Updated some properties to reflect UART/RS-232 operation
10.01 November 30, 2012 Added BulleT KB interface