APC RAID Subsystem SCSI-SATA II - Manual (Page 126)

- 126 -
Figure H.12: attach LUN.
Step B: configure your host/server
1. User needs to setup software iSCSI initiator or iSCSI HBA first.
2. Below is the configuration for Windows Server 2003 R2 with Microsoft iSCSI
initiator. Please install the latest Microsoft iSCSI initiator from below link.
http://www.microsoft.com/downloads/details.aspx?FamilyID=12cb3c1a-15d6-
4585-b385-befd1319f825&DisplayLang=en
Figure H.13: run MS iSCSI initiator, go to “Discovery” tab, add target portal (iSCSI data
port).