APC RAID Subsystem SCSI-SATA II - Manual (Page 49)

- 49 -
1. Select “/ Volume config / Volume group”.
2. Click “
“.
3. Input a VG Name, choose a RAID level from the picklist, press
“ “ to choose the RAID PD slot(s), then press
“ “.
4. Check the outcome. Press “ “ if all setups are
correct.
5. Done. A VG has been created.
Figure 3.6.7.2
(Figure 3.6.7.2: Creating a RAID 5 with 4 physical disks, named “VG-R5”. The total size is
114GB. Because of no related UDV there, free size still remains 114GB.)
Step 2: Create UDV (User Data Volume).
To create a user data volume, please follow the procedures.
Figure 3.6.7.3
1. Select “/ Volume config / User data volume”.