APC RAID Subsystem SCSI-SATA II - Manual (Page 31)

- 31 -
Figure 3.4.7.1
3.4.8 SNMP
Select “SNMP” to set up SNMP trap for alert via SNMP. It allows up to 3 SNMP
trap addresses. Default community setting is “public”. User can choose the event
log type and the default value of SNMP is INFO event log enabled only.
Figure 3.4.8.1
3.4.9 System log server
Select “System log server” to set up the system log server for RAID subsystem
event log trapping which is able to support remote logging. Remote logging