APC RAID Subsystem SCSI-SATA II - Manual (Page 21)

- 21 -
Reset to Default Reset to default sets password to default: 00000000, and
set IP address to default as DHCP setting.
Default IP address: 192.168.10.50 (DHCP)
Default subnet mask: 255.255.255.0
Default gateway: 192.168.10.254
The following is LCM menu hierarchy.
[Alarm Mute] [•Yes No‚]
[Reset] [•Yes No‚]
[Reset/Shutdown]
[Shutdown] [•Yes No‚]
Volume Size
(xxxxxx G)
Adjust Volume
Size
[Quick Install]
RAID 0
(RAID 1/RAID 3/
RAID 5/RAID 6)
xxxxxx GB
Apply The
Config
[•Yes No‚]
[IP Config]
[Static IP]
[IP Address]
[192.168.010.050]
[IP Subnet Mask]
[255.255.255.0]
[View IP Setting]
[IP Gateway]
[192.168.010.254]
[DHCP] [•Yes No‚]
[IP Address]
Adjust IP
address
[IP Subnet
Mask]
Adjust Submask
IP
[IP Gateway]
Adjust Gateway
IP
[Change IP
Config] [Static IP]
[Apply IP
Setting]
[•Yes No‚]
proIPS
•‚
[Reset to Default] [•Yes No‚]
2.9.2 System buzzer
The system buzzer features are describing in the following:
Caution
Before power off, it is better to execute “Shutdown” to flush
the data from cache to physical disks.