APC RAID Subsystem SCSI-SATA II - Manual (Page 57)

- 57 -
Figure 3.6.7.13
(Figure 3.6.7.13: Slot 5 has been set as dedicated spare disk of VG named “VG-R5”.)
Step 6: Done. The PDs can be used as iSCSI disks.
Delete UDVs, VG, please follow the steps.
Step 7: Detach LUN from UDV.
Please refer to Step 6 of Example 1 to detach LUN.
Step 8: Delete UDV (User Data Volume).
Please refer to Step 7 of Example 1 to delete UDV.
Step 9: Delete VG (User Data Volume).
Please refer to Step 8 of Example 1 to delete VG.
Step 10: Free dedicated spare disk.
To free dedicated spare disks, please follow the procedures:
1. Select “/ Volume config / Physical disk”.