APC RAID Subsystem SCSI-SATA II - Manual (Page 33)

- 33 -
4. Change controller’s system log server port number as above
5. Start logging on "Interactives Syslog Server"
3.4.10 Event log
Select “Event log” to view the event messages. Press “Filter” button to choose
the display. Press “Download” button will save the whole event log as text file
with file name “log-ModelName-SerialNumber-Date-Time.txt” (E.g., log-IS16GL-
A00021-20061011-114718.txt). Press “Clear” button will clear event log. Press
“Mute” button will stop alarm if system alerts.
Figure 3.4.10.1
For customizing your own display of event logs, there are total three display
methods, on Web UI/Console event log page, popup windows on Web UI, and on
LCM. The default setting of these three displays is WARNING and ERROR event
logs enabled on Web UI and LCM. The popup is default disabled.
Figure 3.4.10.2
The event log is displayed in reverse order which means the latest event log is
on the first page. The event log is actually saved in the first four hard drives, each
hard drive has one copy of event log. For one controller, there are four copies of
event logs to guarantee users can check event log most of the time when there
is/are failed disk(s).
3.5 iSCSI config
“iSCSI config” selection is for the setup of “Entity Property”, “NIC”, “Node”,
“Session”, and “CHAP account”.