APC RAID Subsystem SCSI-SATA II - Manual (Page 64)

- 64 -
When upgrading, there is a progress bar running. After finished upgrading, the
system must reboot manually.
Notice: When upgrading FW, IS16GL can only accept the newer version and
guarantee the compatibility issue which means, if customer changes FW to older
version, the VG/UDV/LUN config may be lost.
3.8.2 Info
Enter “Info” function will display system type, FW number, CPU type, RAM size,
and serial number.
Figure 3.8.2.1
3.8.3 Reset to default
Enter “Reset to default” function, it allows user to reset the controller to the
factory default setting.
Figure 3.8.3.1
3.8.4 Config import & export
Enter “Config import & export” function, it allows user to save system
configurable values – export function and to apply all configuration – import
function. For the volume config setting, the values are available in export function
and not available in import function which can avoid confliction/date-deleting
between two subsystems. That says if one controller already has valuable data
on the disks and user may forget it and use import function. If the volume setting