APC RAID Subsystem SCSI-SATA II - Manual (Page 89)

- 89 -
1. Microsoft MPIO is not supported on Windows XP or Windows 2000
Professional.
Workaround solution: Using Windows Server 2003 or Windows
2000 server to run MPIO.
D. Microsoft iSCSI Initiator
Here is the step by step to setup Microsoft iSCSI Initiator. Please visit Microsoft
website for latest iSCSI initiator. The following setup may not use the latest
Microsoft iSCSI initiator.
1. Run Microsoft iSCSI Initiator version 2.03. Please see Figure D.1.
2. Click “Discovery”.
Figure D.1
3. Click “Add”. Input IP address or DNS name of iSCSI storage device.
Please see Figure D.2.
Figure D.2