APC RAID Subsystem SCSI-SATA II - Manual (Page 28)

- 28 -
3.4.1 System name
Select “System name” to change system name. Default system name
composed by model name and serial number of this system, ex: P120-000001.
Figure 3.4.1.1
3.4.2 IP address
Select “IP address” to change IP address for remote administration usage.
There are 2 selections, DHCP (Get IP address from DHCP server) or static IP.
The default setting is DHCP enabled. User can change the HTTP, HTTPS, and
SSH port number when the default port number is not allowed on host/server.
Figure 3.4.2.1
3.4.3 Language
Select “Language” is for changing GUI language. There are 3 selections, Auto
Detect, English, and Simplified Chinese. The default language is the same with
your browser (IE or Firefox) default language.