APC RAID Subsystem SCSI-SATA II - Manual (Page 79)

- 79 -
Figure 4.5.1
(Figure 4.5.1: setup QCopy on selected snapshot UDV)
Figure 4.5.2
(Figure 4.5.2: input the target system data port IP address)
Figure 4.5.3
(Figure 4.5.3: select the target UDV LUN, the target UDV capacity must be equal or larger
than the source UDV capacity.)
Figure 4.5.4
(Figure 4.5.4: click OK after the target UDV is dismounted from host/server.)
Figure 4.5.5
(Figure 4.5.5: QCopy is copying, and the completed percentage it 24%)
Tips
When setup block size for UDV, please setup 512B for QCopy.
In the current design, QCopy supports 512B block size only
for both source and target side.