APC RAID Subsystem SCSI-SATA II - Manual (Page 63)

- 63 -
import & export” to export and import all controller configuration except for
VG/UDV setting and LUN setting, and “Shutdown” to either reboot or shutdown
the system.
Figure 3.8.1
3.8.1 Upgrade
Enter “Upgrade” function to upgrade firmware. Please prepare new firmware file
named “xxxx.bin” in local hard drive, then press “
” to select the file.
Click “ ”, it will pop up a message “Upgrade system now? If
you want to downgrade to the previous FW later, please export your system
config first”, click “Cancel” to export system config first, then click “OK” to start
to upgrade firmware.
Figure 3.8.1.1
Figure 3.8.1.2