APC RAID Subsystem SCSI-SATA II - Manual (Page 82)

- 82 -
Appendix
A. Certification list
· RAM
RAM Spec: 184pins, DDR333(PC2700), Reg.(register) or UB(Unbufferred),
ECC or Non-ECC, from 64MB to 1GB, 32-bit or 64-bit data bus width, x8 or
x16 devices, 9 to 11 bits column address.
Vendor Model
Unigen UG732D6688KN-DH, 256MB DDR333 (UNBUFFERED) with Hynix
Unigen UG732D6688KS-DH, 256MB DDR333 (UNBUFFERED, LOW
PROFILE) with Hynix
Unigen UG732D7588KZ-DH, 256MB DDR333 (REG, ECC) with Elpida
Unigen UG764D6688LS-DH, 512MB DDR333 (UNBUFFERED, LOW
PROFILE) with Hynix
Unigen UG764D7588KZ-DH, 512MB DDR333 (REG, ECC) with Elpida
Unigen UG7128D7588LZ-DH, 1GB DDR333 (REG, ECC) with Hynix
Unigen UG7128D7488LN-GJF, 1GB DDR400 (ECC) with Hynix
Unigen UG7128D7588LZ-GJF, 1GB DDR400 (ECC, REG) with Elpida
Unigen UG7128D7588LZ-GJF, 1GB DDR400 (ECC, REG) with Hynix
Unigen UG718D6688LN-GJF, 1GB DDR400 (Non-ECC) with Hynix
Unigen UG718D688LN-GJF, 1GB DDR400 (Non-ECC) with Elpida
ATP AG28L72T8SHC4S, 1GB DDR400 (ECC) with Samsung
ATP AG28L64T8SHC4S, 1GB DDR400 (Non-ECC) with Samsung
ATP AG64L72T8SQC4S, 512MB DDR400 (ECC) with Samsung
· iSCSI Initiator (Software)
OS Software/Release Number
Microsoft
Windows Microsoft iSCSI Software Initiator Version 2.03
System Requirements:
1. Windows XP Professional with SP2
2. Windows 2000 Server with SP4
3. Windows Server 2003 with SP1
4. Windows Server 2003 R2
Linux The iSCSI Initiators are different for different Linux Kernels.
1. For Redhat Linux 9 (Kernel 2.4), install linux-iscsi-3.6.3.tar
2. For Red Hat Enterprise Linux 3 (Kernel 2.4), install linux-iscsi-
3.6.3.tar
3. For Red Hat Enterprise Linux 4 (Kernel 2.6), use the build-in
iSCSI initiator in kernel 2.6.9-34.Elsmp
Mac ATTO XTEND 2.0x SAN / Mac iSCSI Initiator