APC RAID Subsystem SCSI-SATA II - Manual (Page 24)

- 24 -
Upgrade à Browse the firmware to upgrade / Export config
Info à System information
Reset to default à Reset to factory default
Config import & export à Controller configuration import and export function
Shutdown à Reboot / Shutdown
Logout
3.2 Login
IS16GL supports graphic user interface (GUI) to operate the system. Be sure to
connect the LAN cable. The default IP setting is DHCP; open the browser and
enter:
http://192.168.10.50 (Please check the DHCP address first on LCM)
Click any function at the first time; it will pop up a dialog for authentication.
Login name: admin
Default password: 00000000
After login, you can choose the function blocks on the left side of window to do
configuration.
Figure 3.2.1
There are six indicators at the top-right corner for backplane solutions, and
cabling solutions have three indicators at the top-right corner.
Figure 3.2.2