APC RAID Subsystem SCSI-SATA II - Manual (Page 53)

- 53 -
1. Select LUNs by clicking the checkbox of the row, then click
“ ”. There will pop up a confirm page.
2. Choose “OK”.
3. Done.
Step 7: Delete UDV (User Data Volume).
To delete the user data volume, please follow the procedures:
1. Select “/ Volume config / User data volume”.
2. Select UDVs by clicking the checkbox of the row.
3. Click “
“. There will pop up a confirm page.
4. Choose “OK”.
5. Done. Then, the UDVs are deleted.
Step 8: Delete VG (Volume Group).
To delete the volume group, please follow the procedures:
1. Select “/ Volume config / Volume group”.
2. Select a VG by clicking the checkbox of the row, make sure that there
is no UDV on this VG, or the UDV(s) on this VG must be deleted first.
3. Click “ “. There will pop up a confirmation page.
4. Choose “OK”
5. Done. The VG has been deleted.
Step 9: Free global spare disk.
To free global spare disks, please follow the procedures.
Tips
When deleting UDV, the attached LUN(s) related to this UDV
will be detached automatically, too.
Tips
The action of deleting one VG will succeed only when all of the
related UDV(s) are deleted in this VG. Otherwise, it will have
an error when deleting this VG.