elektraLite P100 Manual Part Two - Manual (Page 50)

122
SET UP
(continued).
FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES
11.To add Stage Focus to Use > key to change from Unless you intend to use Stage Focus
the fixture. Pan/Tilt invert to Stage Focus you need not change the default settings
12. To add another fixture
Press F1 Now repeat steps 4 thru 9 until you
have all your fixtures added.
13.To activate a fixture Press FIXTURE 1 ENTER This will allow you to work the fixture
Obviously you can type in any fixture
number, provided (of course) it is in the
show and you have added it to the
show's memory.
CREATING FIXTURE GROUPS
FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES
1. To make a fixture group Press ADD FIXTURE "?" TO You can use the "THRU" "AND" &
GROUP "?" "ALL" buttons to help you group
the fixtures quicker.
2. To view a fixture group Press Group "?" You will now see the group of fixtures
displayed. The ?? means that the values
are different for all of the fixtures within
the group. Moving the rotaries will
bring the values "together".
3. To make a second fixture Press ADD FIXTURE 2 THRU 10 This simply demonstrates how to
group AND FIXTURE 20 TO GROUP 2 combine these fixtures into the same
group.
4. To make a fixture group
This is done no differently than creating
with different types of a group as described in 1 and 3. The
fixtures. common channels (or the most common
fixture to be entered in the group) will
be displayed first. The most least
common channels will be displayed last.
Operating a Fixture Group