elektraLite P100 Manual Part Two - Manual (Page 53)

125
ENTER. 1000!
6. To Check your preset Press PRESET "n" ENTER Make sure your coming from another
position! Move the rotaries around for
at least one of the fixtures in the Preset
PRIOR to checking the preset.
Remember if you did not record a
feature in the preset then that feature
will not change when you go to check
the preset. This also means that if you
did not store a dimmer value in the
preset (which is normal) then when you
go to check the preset it will turn the
light off.
STORING A FEATURE PRESET
FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES
1. Clear everything to start from Press CLEAR ALL ENTER This takes all dimmer values to zero
the beginning (these are HTP channels). Clears all
other features out of the rotaries, but