elektraLite P100 Manual Part Two - Manual (Page 54)

126
because they are LTP channels the
fixtures remain in their Last Position.
2. Hi-lite the fixtures Press HI-LITE FIXTURE "n" Use the rotaries, or the color, or This is a "trick". It will open your
you want in the preset. ENTER gobo buttons to set up the features dimmer but won't record those feature
you want to store. values into the the preset. The fixture
features display has an " H " at the top
right hand side to tell you you've
hi-lited the fixture. Now set the features
you want to record as a Fp .
Caution if you move a
rotary with a feature that you do not
want recorded in the preset you must
clear that rotary by pressing CLEAR
ROTARY "NO." ENTER.
Otherwise whatever value for that
feature which is displayed will be
recorded in the feature preset.
3. Storing the Feature Preset (Fp) Press STORE FEATURE PRESET You have now recorded the Fp.
"n" ENTER
4. To view the Feature Preset (Fp) Press FEATURE PRESET ENTER Use the ^ & v keys to access You can name a feature preset using
number, name, feature count. the keyboard. A feature preset can have
Use <> keys when the cursor several features stored, so hence the
is in the feature field. It will display display feature count. If you accidently
the features (Iris,Color,etc) and store a feature in the Fp that you don’t
the corresponding DMX value. want, then press F1 (clear feature).
Make sure you’re viewing the feature
at the bottom right of the screen, that
you want to delete, first.
STORING A FEATURE PRESET
(continued)
FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES
5. Attaching a Feature Preset (Fp) Press ADD FEATURE PRESET The result is displayed in the fixture
to a fixture. "n" TO FIXTURE "n" ENTER features. For example,
"FPreset (4) :2 means that there are 4
Fp attached to the fixture.The current