elektraLite P100 Manual Part Two - Manual (Page 63)

135
Hot Key editor Then press RECORD. Once you recorded. The <-- key deletes the
have finished press RECORD last keystoke. The Undo button
again to turn it off or Esc button in the keyboard is
recorded normally but in playback
it causes a pause to occur at that
point, so the programmer can
add a number or command. For
example add cue ? to submaster ?
would be input into a hot key as
Add cue undo to submaster undo.
It is also legal for hot keys to
invoke other hot keys.
DELETE
FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES
1. To delete the entire Press ALL DELETE ENTER Press YES or NO WARNING: this will delete the
contents of the CP-100 entire memory. Okay?!!!
2. To delete the entire show Press DELETE ALL ENTER Press YES or NO This will delete only the show
leaving only fixtures,
dimmers, groups &
parameters.
3. To delete only fixtures
Press DELETE ALL FIXTURES Press YES or NO Of course you can delete only one
fixture, or group of fixtures by
utilizing the correct command.
For example DELETE GROUP 10
4. To Delete only dimmers, Press the appropriate button Take extreme care once the
submasters, presets, feature after DELETE and follow it function is executed, there is no
presets, macro, etc with ENTER turning back!!
SET UP FOR DIMMERS