Storing a cue – elektraLite P100 Manual Part Two User Manual
Page 55
127
Fp being 2 .Any feature which is
part of the Fp is shown by the letter (F)
being displayed beside that fixture.
You can also attach a Fp to a group of
fixtures. This requires you to substitute
the word
GROUP "n"
instead of
FIXTURE "n"
in the first button seq.
6. Attaching a second Fp.
Press ADD FEATURE PRESET
It is common to attach a second Fp to a
"n" TO FIXTURE "n" ENTER
fixture. The first feature Fp could be
for
color while the second could be for
gobo.
STORING A CUE.
FUNCTION
FIRST BUTTON SEQUENCE
SECOND BUTTON SEQUENCE
NOTES
1. To store a cue
Press STORE CUE "n" ENTER
Having moved the fixtures & dimmers
to the position you wish to record.
Pressing the first button sequence
"locks your lighting look into the
board".
2. To look at the cues you have
Press CUE ENTER
You are now in the Cue Editor.
stored in the board (not out on
To see the fixtures that are in a cue
stage! See 4 & 5 below).
press fixture "n" enter. The cue editor
shows any presets attached to the cue.
Fixture and Dimmer filters are a way of
simply taking fixtures or dimmers out
of
the
cue.
STORING A CUE
(continued)
FUNCTION
FIRST BUTTON SEQUENCE
SECOND BUTTON SEQUENCE
NOTES
3. To add a fade time to a cue
Use the ^ or v keys to get to
Press the number keys followed by
The maximum time is 100,000seconds!
[In time: " "]
or [Out time: " "]
ENTER. Then press STORE CUE
The "in time" is the time taken for the
ENTER.
cue to "fade in". The out time is the
time taken for the cue to "fade out".
You can quickly adjust the time of a