elektraLite P100 Manual Part Two - Manual (Page 56)

128
cue by using the number keypad or
the "xfade time" fader. However the
time is not stored in the cue until you
press STORE CUE ENTER. This
way if you need to make a fast time
change for the show tonight then it
can be done on a "temporary" basis.
4. To execute the cue Press CUE "n" GO This will execute the cue including any
time fade. You can override the time
fade by typing in a different value in the
cue editor or by using the Xfade fader .
5. To view a cue quickly. Press CUE "n" ENTER This will show you the cue and bypass
the fade time. Useful to review cues
or to make chases or macros quickly.
6. To view cues when you Press CUE ENTER Press EDIT GO or EDIT BACK This allows the programmer to load
don’t know the cue numbers (do not press enter, just keep ) the previous or next cue with no
(invoking a cue list) (pressing GO or BACK to move) crossfade time being executed. This
(to the next cue). way you can quickly tep through a
sequence of cues for editting without
having to wait for a crossfade or
think about the cue numbers!
STORING A CUE
(continued)
FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES
7. Solo or not to Solo Press the SOLO button It is imperative that you understand