elektraLite P100 Manual Part Two - Manual (Page 6)

78
This switches to the CHASE EDITOR display.
Chase n
This stops any running chase in the chase editor, and loads a specific chase.
Chase n Go
This stops any running chase in the chase editor, loads a specific chase, and starts it running, if it has
at least two steps. (Note that this command is executed as soon as Go is pressed.)
Chase n … Stop
This stops the specified chases, wherever they may be playing in the system, not including the chase
editor. For instance, it can stop chases played by the macro editor, by submasters, or by macros within
submasters. If macro recording is on, this also records one ore more Stop Chs n events, but only for
specified chases that are actually active at the end of the macro.
Chase Go
This starts the chase in the chase editor running, if it has at least two steps. (Note that this command is
executed as soon as Go is pressed.)
Chase Record
If the chase editor isn't empty, this first asks if the user wishes to record a new chase or append to the
old one. If the former, the chase editor is cleared. Then, this starts Record LED flashing, and appends
subsequent cue selections to the chase editor, until Record is pressed again. If cues are selected with
the Cue command and Solo is off, each command adds the cue or cues to the last step. If cues are
selected with the Edit Cue command or Solo is on, each command adds the cue or cues to a new step.
An error results if macro recording is in progress. Note that a chase can be recorded at the same time
it is played.
Chase Stop
This stops any running chase in the chase editor, without stopping any cue crossfade in the cue editor
or macro playback in the macro editor. If macro recording is on, this records a Stop Chase event,
which will stop any chases played by the macro during playback. (Note that this command is executed
as soon as Stop is pressed.)
Clear All
This clears the cue editor, chase editor and macro editor. This darkens the stage, unless dimmer or
submaster faders are also operating.
Clear All Chase (from) Submaster p.f
This clears all chases from a specific submaster.
Clear All Cue (from) Step
Clear All Cue (from) Step n …
These clear all cues from the last step, or from specific steps, without removing the steps.
Clear All Cue (from) Submaster p.f
This clears all cues from a specific submaster.
Clear All Dimmer
This clears all dimmers from the cue editor.